One of the first things I did was set up a workshop out in the
garage. I managed to bring quite a few tools with me from
California including my radial saw but space in the car was limited and
I ended up buying a new Drill Press, a vise, and a variety of power
tools. A man down the street was also doing a Rehab on a house and he
had a tool cabinet which he was getting rid of so I picked that up and
put it out in the garage
The bathroom was a major challenge as the bathtub had to be
replaced. It was an old metal tub and was chipped and rusted in
spots. I decided to go with a spa tub. All of the faucets
were bad as well so those had to be accessed through the closet wall in
the guest bedroom. I built a frame for the tub to sit on and Brian
came up and helped me pour concrete under the tub to avoid
cracking. Once the concrete was in place, I lowered the tub onto
it using a ratchet hoist so with the side supports and the concrete
base, it has a very solid feel to it.
We installed bead board all around the lower portion of the bathroom.
Then I routed trim for the top of the bead board as well as for the
crown molding. I fabricated a headboard for the top of the shower
curtain to hide the rod. The walls in the interior of the house
had the 2x4's laid flat making the walls only about 2 inches thick so
this caused the Electric Wall Heater to stick way out so I made a frame
and towel hanger as part of the heater frame. Michelle bought all
new accessories for the bath as well as well as creating the WAL and KER
pictures for the frames on each side of the heater.
One other thing I did was to buy a clothes hanger rod and modify it
to create a pole to hang onto while getting in and out of the tub.
Michelle likes to call this my "stripper pole". All the
rooms in this house have hardwood floors so the mater bedroom needed
only throw rugs, paint, and more of Michelle's decorating. I had
to go up into the attic to install the electric for the new fan that we
put in this room.